Dosing Systems Australasia supplies two ranges of water-driven dosing pumps: Tefen MixRite and Hydro Systems. This guide shows which unit suits which job, how to choose by flow range, injection ratio and connection, and what sits behind the range in stock, parts and support.
Short answer: match on three things: flow range, injection ratio and connection. Most sites suit a Tefen MixRite 2.5 or 3.5, small flows suit the MixRite LF-1000, and big mains suit the MixRite TF range, with Hydro Systems units alongside each.
The Tefen MixRite range
MixRite pumps run on the water flowing through them, so there is no electricity needed at the point of injection, and each pump starts automatically with water flow. The range covers everything from small zones to field mains. Flow ranges vary by ratio model, so confirm the exact model on the product page.
| MixRite model | Suits | Flow, up to | Pressure | Connection |
|---|---|---|---|---|
| LF-1000 | Small flows: mist lines, propagation and small zones | See product page | See product page | See product page |
| 2.5 | The workhorse: container blocks, glasshouse feed lines, dairy and poultry mains | 41 L/min | 0.2 to 8 bar | 3/4 inch BSPT |
| 3.5 | The workhorse, for a little more flow | 58 L/min | 0.2 to 8 bar | 3/4 inch BSPT |
| TF5 | High-flow blocks and field mains | 83 L/min | 0.2 to 8 bar | 1 inch BSPT |
| TF10 | High-flow blocks and field mains | 166 L/min | 0.2 to 8 bar | 1 1/2 inch BSPT |
| TF25 | The biggest mains | 416 L/min | 1 to 8 bar | 2 inch BSPT |
Chlorine versions are available across the 2.5, 3.5 and TF models, so ask about the version that suits your chemical.
The Hydro Systems range
Hydro Systems units cover the same jobs from another maker. The MiniDos and SuperDos are listed on our Dosmatic page, and the range also includes the AquaBlend and the Chemilizer. The AquaBlend Xtreme is the acid-duty option.
| Hydro Systems unit | Suits | Flow, up to | Connection |
|---|---|---|---|
| MiniDos | Small, precise doses | 45 L/min | 3/4 inch BSP |
| SuperDos 20 | The workhorse range | 76 L/min | 1 inch BSP |
| SuperDos 30 | Larger flows | 113 L/min | 1 inch BSP |
| SuperDos 45 | Big mains | 120 L/min | 1 1/4 inch BSP |
| AquaBlend | Adjustable 2% and 5% models | 41 L/min | 3/4 inch BSP |
| Chemilizer 9000 | Low flow, and water with sand or minerals | 41 L/min | 3/4 inch BSP |
How to choose between them
Match your site on three checks before you order:
- Flow range: check the lowest and highest flow the unit will see against the model’s published range. Our guide to choosing a water-driven dosing pump explains how.
- Injection ratio: match the ratio you need, and confirm the ratio variant with us before ordering, because not every ratio comes in every version.
- Connection and seals: check the connection size and that the seals suit your chemical. Chemical compatibility is the responsibility of the purchaser, so read our chemical compatibility page and follow the chemical label.
Chlorine and acid versions
Standard units are for fertiliser and general dosing. For chlorine, the chlorine-resistant (CL) models have Viton seals. For acid, the acid-duty (PVDF) models have a PVDF body. Not every ratio comes in a CL or PVDF version, so ask us to confirm the model for your chemical.
What sits behind the range
Units, seal kits and spares are in stock in Australia and ship within one business day, and a seal change takes ten minutes. See our spare parts page for what we supply, or our guide to buying a dosing pump for what to check on parts, servicing and warranty before you order.
Trading in an older doser?
Until 31 December 2026, DSA is offering a trade-in credit: $400 off a Tefen MixRite or $300 off a Hydro Systems unit when you trade in any Dosatron pump, working or not, with a free seal kit included. The model-by-model chart and the full terms are on the trade-in offer page.
Dosatron is a trade mark of its owner. Dosing Systems Australasia is not affiliated with Dosatron or its distributors.
Frequently asked questions
What is the difference between Tefen MixRite and Hydro Systems units?
Both are water-driven dosing pumps that run on the water flowing through them. DSA supplies both ranges, and the right unit depends on your flow range, injection ratio, connection and chemical rather than the brand. Tell us your application and we will help you compare the options.
Which MixRite suits a small flow?
The MixRite LF-1000 suits small flows such as mist lines, propagation and small zones, where a larger unit never reaches its minimum flow. The Hydro Systems options for small flows are the MiniDos and the AquaBlend 0.8 to 5%.
Which MixRite suits high-flow mains?
The MixRite TF range suits high-flow blocks and field mains: the TF5 handles up to 83 L/min, the TF10 up to 166 L/min and the TF25 up to 416 L/min, with chlorine versions available. The Hydro Systems option is the SuperDos 45.
Do MixRite and Hydro Systems dosing pumps need electricity?
No. These units are water-driven, so a MixRite pump runs on the water flowing through it with no electricity needed at the point of injection, and it starts automatically with water flow. The SuperDos, AquaBlend and Chemilizer are water-driven too.
Which version do I need for chlorine or acid?
Chlorine-resistant (CL) MixRite models have Viton seals, and acid-duty (PVDF) models have a PVDF body. The AquaBlend Xtreme is the Hydro Systems option for acid. Not every ratio comes in a CL or PVDF version, so confirm the model with us and read our chemical compatibility page first.
How does the DSA trade-in offer work?
Until 31 December 2026, trade in any Dosatron pump, working or not, for $400 off a Tefen MixRite or $300 off a Hydro Systems unit, with a free seal kit included. The old unit must be returned within 30 days of delivery, and the limit is 10 units per customer. See the trade-in offer page for the full terms. Dosatron is a trade mark of its owner, and Dosing Systems Australasia is not affiliated with Dosatron or its distributors.
Not sure which unit suits your site?
Tell us your flow rate, pressure, ratio and chemical and our team will help you choose the right unit. Call (02) 4329 0905 or request a quote below.
This article is general guidance only. Confirm the model, ratio variant and seal material with DSA before you order, and always follow the chemical label.

