Systems & Panels

PortAdose Micro

Constructed from Stainless Steel and incorporating the Dosmatic MicroDos injector, the PortAdose Micro is lightweight and mobile; simply connect to a standard garden hose. The PortAdose Micro is designed for small jobs. Apply fertilizer, trace elements, fungicides or whatever liquid concentrate you need.

Maximum Flow:    13 Litres per minute
Maximum Pressure:    500kPa
Injection Range:    0.5 – 5%
Tank Capacity:   1 Litre

Youtube video: http://www.youtube.com/watch?v=MtVgKE9tI9A

 

PortAdose SS Trolley

The PortAdose SS Trolley is designed for larger jobs that require mobility. The PortAdose SS Trolley is built to order which allows for flexibility in design meeting individual requirements. The PortAdose SS Trolley is constructed from Stainless Steel, incorporates a Dosmatic Injector, 200mm solid rubber tyres, 104 Micron Filter and accessories.

The operational specifications are very much dependent on the Dosmatic Injector selected. Use the following specifications as a guide only;

Maximum Flow:    110 Litres per minute
Maximum Pressure:    690kPa
Injection Range:    0.025 – 2.5%
Tank Capacity:    30 Litre

 

Manifold Fractional

The Manifold Fractional is a cost effective method of dosing a high water flow is by diverting a portion of the water flow through a Dosmatic injector. This is not a proportional injection system but is effective where there is a broader window of accuracy required.

The operational specifications are very much dependent on the Dosmatic Injector selected. The following is a guide only as to the flow of water diverted through the by-pass;

Maximum Flow:    170 Litres per minute
Maximum Pressure:    690kPa
Injection Range:    0.025 – 20%

 

Manifold Hi Flow 300

It is often difficult to dose both high water flows and low water flows with the same injection system. The Manifold Hi Flow will dose water flows from 1 and 300 Litres per minute. As long as both suction lines are in the same concentration tank, effective proportional injection can be achieved.

The operational specifications are very much dependent on the Dosmatic Injector selected. The following is a guide only;

Maximum Flow:    300 Litres per minute
Maximum Pressure:    690kPa
Injection Range:    0.025 – 5%

 


Nurseryman Trio

The Nurseryman Trio is a panel system specifically designed for nursery applications.

  • Three Dosmatic Injectors plumbed inline.
  • Mounted on a 12mm polymer board.
  • by-pass configuration enabling the injection capacity to be isolated.
  • 3 Injectors:     #1 Acid     #2 “A” Fertilizer     #3 “B” Fertilizer
  • Designated mixing chambers to ensure complete blending of additive.
  • Remote injection of fertilizer so that only water drives each injector. Fertilizer can be abrasive in nature which will reduce the life of the injector if allowed to be incorporated in the drive water of the following injector.
  • pH correction: The first injector remotely injects acid into the first mixing chamber.
  • Filtration: The Dosmatic Twist ll Clean filter is used to filter the drive water to 104 micron.
  • An Anti Siphon valve is incorporated to minimise the risk of siphoning when system is not in use.
  • A ball valve is incorporated as the treated water leaves the system. This enables a sample to be taken for EC and pH evaluation.
  • Available in 3 pipe & Injector sizes;

¾” ~ Maximum Flow 40 Litres per minute
1” ~ Maximum Flow 100 Litres per minute
1½” ~ Maximum Flow 150 Litres per minute

Please contact us for more information:   dougrowe@dosingsystems.com.au         0418 607 156